Update NAT Gateway Port Forwarding Rules - UpdateNATGWPolicy
Overview
Update NAT Gateway Port Forwarding Rules
Definition
Public Parameters
| Parameter Name | Type | Description Information | Required |
|---|---|---|---|
| Action | string | Corresponding API command name, the current API is UpdateNATGWPolicy. | Yes |
| PublicKey | string | The user's public key can be obtained from Console (opens in a new tab) | Yes |
| Signature | string | User signature generated based on public key and API command, see Signature Algorithm | Yes |
Request Parameters
| Parameter Name | Type | Description Information | Required |
|---|---|---|---|
| Region | string | Region. See List of Regions and Availability Zones | Yes |
| ProjectId | string | Project Id. If not filled in, the default project is used. Sub-accounts must fill in. Please refer to the GetProjectList interface. | No |
| NATGWId | string | NAT Gateway Id | Yes |
| PolicyId | string | Forwarding Strategy Id | Yes |
| Protocol | string | Protocol type. Enumerated values are: TCP, UDP | Yes |
| SrcEIPId | string | Source IP. Fill in the corresponding EIP Id. | Yes |
| SrcPort | string | Source port. You can fill in a fixed port or a range of ports. The supported port range is 1-6553. | Yes |
| DstIP | string | Target IP. Fill in the corresponding target IP address. | Yes |
| DstPort | string | Destination port. You can fill in a fixed port or a port range. The supported port range is 1-65535. | Yes |
| PolicyName | string | Forwarding policy name. Default is empty. | No |
Response Field
| Field Name | Type | Description Information | Required |
|---|---|---|---|
| RetCode | int | Return status code. If it is 0, it means successful return. If it is not 0, it means failure. | Yes |
| Action | string | Operation command name. | Yes |
| Message | string | Returns an error message, providing detailed description when RetCode is non-zero. | No |
Example
Request Example
https://api.surfercloud.com/?Action=UpdateNATGWPolicy
&Region=xxx
&ProjectId=xxx
&NATGWId=hgcVoyEy
&PolicyId=nfKIELvQ
&Protocol=TCP
&SrcEIPId=yuPOfoNO
&SrcPort=zUtgCzdK
&DstIp=NNWLPLlu
&DstPort=SOPruxNJ
&PolicyName=YTEVHszLResponse Example
{
"Action": "UpdateNATGWPolicyResponse",
"RetCode": 0
}